Tired pavers made even, full and sealed again
Paver Restoration and Resealing in Southside, FL
Faded, sunken or peeling Southside pavers can get a free restoration estimate by calling (904) 966-4279.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who restores worn pavers in Southside, and how quickly can I hear back?
A local contractor restores and reseals pavers across Southside, and you will hear back within 1 business day, often within hours. The look is free and nothing obliges you to book. To start, call (904) 966-4279.
Restoration is for pavers that have gone past a simple wash. The color has flattened, the old sealer is peeling or cloudy, the joints sit low and a corner of the driveway has begun to dip. A restoration repairs, cleans, refills and reseals in the right order so the surface looks closer to the day it was laid. Show the contractor the worst spot when you book your free estimate.
Is my paver driveway too old to restore?
Probably not. A Southside paver company says driveways here are often 10 to 25 years old and commonly sit on a thin builder grade base. That base, not the pavers, is usually what dips and rocks. Pavers that are whole and matchable can be restored, and one restoration company says it may do so for a fraction of what replacing costs. For an honest read on yours, call (904) 966-4279.
Replacement makes sense when pavers are cracked through or crumbling. Stallone's says single cracked pavers can be swapped when matching ones can be found. Ask the contractor which of the two your surface needs when you book your free estimate.
Where around Southside can pavers be restored?
Restoration is open to homes in Southside and in each town below, from gated streets to older suburban lots. Pavers differ from one lot to the next, so each town page carries its own local notes. If your street is missing, call (904) 966-4279.
What goes wrong with pavers as they age in Southside?
Hydroseal describes four stages. Color loses depth first, joints drop as runoff exposes low sand, stains build from irrigation marks and vehicles, and old coatings wear unevenly. Each stage is cheaper to fix than the next. (904) 966-4279 is the number to find out where your pavers stand.
Faded color
Strong sun flattens paver color, and a sealer that has worn thin no longer deepens it.
Low joints
Summer storms and sprinkler runoff wash sand out. With the joints empty, pavers shift and weeds and ants move in.
Dips and puddles
Poor compaction or water movement near retention ponds can settle a paver base, especially around pool decks and side yards.
Patchy old sealer
A coat that peels in one area and holds in another has to come off before a new one goes down.
In what order is a restoration done?
Stallone's puts it plainly: repair first, then clean, then seal. The order matters because every later step depends on the one before. Skip ahead and the new coat sits on loose, dirty or wet pavers. Before you book your free estimate, picture that sequence and ask how the contractor plans each stage.
A repair means lifting the affected pavers, fixing and compacting the base and resetting them, as Stallone's lays out. A Southside paver company adds that only the damaged area is removed. After that comes the wash, then joints refilled with silica sand, then sealer. Questions about any stage are welcome at (904) 966-4279.
Does old sealer have to be stripped before resealing?
When it has failed, yes. A Duval County washing company says strip and reseal costs more when the old coat has failed. Paver Pressure Repair describes restoration as removing the old coat down to the paver itself. Sealing over a peeling coat only locks the problem in place. Ask how the contractor tests the old sealer when you book your free estimate.
How long does a paver restoration take?
A full restoration often takes about two days, according to a Duval County washing company. Empty joints or a failed coat mean the pavers need time to dry between the wash and the sealer. A summer storm can push the second day. Tell the contractor about gate codes and sprinkler timers, then call (904) 966-4279.
October and November are drier. Unilock asks for clear skies around sealing, and the label sets how long feet and cars should wait. If your pavers went in within the past year, they may need to cure first. Paverson says sealing too early can lock a white haze under the sealer. Mention the install date when you book your free estimate.
How often should pavers be resealed after restoration?
A Duval County washing company calls every two to three years typical, and sun, pool chlorine and storms can bring that to about two. Family Handyman says three to five years once a coat has deteriorated, and warns that extra coats add no protection. Reseal when the coat shows wear, not on a fixed date. For a coat check, call (904) 966-4279.
What does paver restoration cost in Southside?
No page gives one price for a whole restoration, so the table builds one from published pieces. The local range for clean, sand and seal is $1.75 to $3.25 per square foot, and one restoration company posts lower starting rates for each step. Stripping and base repair come on top. For a number on your own pavers, book your free estimate.
Ask for each step as its own line: repair, wash, sand, sealer and any stripping. That makes two bids easy to compare. A figure well below the pieces here likely skips something. Questions about a quote you already hold are welcome at (904) 966-4279.
| Restoration step | Published figure | Where it came from |
|---|---|---|
| Clean, sand and seal together | $1.75 to $3.25 per square foot | A Duval County washing company, November 2026 |
| Clean, sand and seal, starting rate | $1.17 per square foot | A paver restoration company price list |
| Clean and seal without new sand, starting rate | $0.85 per square foot | The same restoration company |
| Clean only, starting rate | $0.25 per square foot | The same restoration company |
| Reset sunken or raised pavers, add on | From $5 per square foot | The same restoration company |
| Strip a failed coat | Costs more, no figure printed | Duval County washing company and restoration company pages |
These are published pieces, and no page gives one price for a full restoration. Rates marked starting are the lowest the company lists. A 500 square foot driveway at the $1.75 to $3.25 range comes to about $875 to $1,625 before any stripping or base repair. Stripping and resetting are quoted after the contractor looks at the surface.
Do HOA rules affect restoring pavers at my Southside home?
They can. A Southside paver company says many neighborhoods here are managed by an association or gated, and that colored sand or a gloss finish may need approval. The Avenues, a gated community of about 750 homes, is one example listed on Wikipedia. Ask for the product details to send along, and book your free estimate.
Shared townhome walkways take steady foot traffic, so they wear faster. If the walkway is common property, the association may need to book the work. Say so when you call (904) 966-4279.
What does a restoration visit include?
Five steps cover most visits. To pick a day, call (904) 966-4279.
1. Inspect the surface
The contractor looks at the coating, joints, runoff paths, stains and any rocking pavers.
2. Lift, fix and reset
Low areas are lifted, the base is compacted and the pavers go back level.
3. Strip and wash
A failed coat comes off, then the pavers are cleaned and stains treated.
4. Refill the joints
Dry silica sand is swept in until every joint is full.
5. Seal and review
A compatible sealer goes on once the surface is dry, and you hear when it can take traffic.
What do restored pavers look like around Southside?
Frequently Asked Questions
How much does it cost to have pavers cleaned and sealed?
One Duval County washing company lists $1.75 to $3.25 per square foot for a clean, sand and seal. On a 600 square foot Southside drive that works out near $1,050 to $1,950, and a failed coat that must be stripped adds to it.
How can I make my old pavers look new again?
Old pavers usually need three things in order: repairs to any sunken spots, a clean with fresh joint sand, and a coat of sealer. A Northeast Florida company says repair comes first, then clean, then seal. Color that has faded deep may come back only partly.
How can I rejuvenate my old pavers?
Rejuvenation is the same job as restoration. The old coat comes off if it has failed, stains are treated, joints are refilled and a new sealer goes on. A paver company says its restoration process can bring back pavers instead of replacing them.
What is the average cost to seal pavers in Florida?
The published local range is $1.75 to $3.25 per square foot for the whole clean, sand and seal. One restoration company lists starting rates from $1.17 for the same three steps. Condition, size and joint work set where a quote falls.
Is there a downside to sealing pavers?
Yes. It is a repeat cost, and a coat over dirty or damp pavers can turn milky. Family Handyman adds that extra sealing does not add protection and can leave a film that discolors the stone. One thin, even coat is the goal.
Is it good to seal pavers in Florida?
Usually. Sun fades color and summer storms wash sand from the joints, and a sealed surface slows both. It is not a cure for a sunken paver, so repairs come first.
When should pavers be replaced instead of restored?
When the pavers themselves are cracked, crumbling or cannot be matched. A Northeast Florida company says single cracked pavers can be swapped when matches can be found. Most faded, stained or sandless pavers can be restored.
Can a restoration be done in one day?
Sometimes, but a sand and seal restoration with empty joints or a failed coat usually takes about two days, says a Duval County washing company. The surface has to dry between the wash and the sealer.
Will restoring my pavers fix the dips and puddles?
Only if the base is repaired. A contractor lifts the pavers, rebuilds and compacts the base, then resets them. Sealer alone cannot lift a low paver.
Does my association need to approve new colored sand or a gloss sealer?
It may. A Southside paver company says many neighborhoods here are managed by an association or gated, and that changes such as colored sand or gloss may need approval. Gate access should be mentioned when booking.
Want worn pavers made right again in Southside?
Phone or fill in the form, and a contractor writes back within 1 business day, often within hours.
Free, no obligation